GE Healthcare
CARESCAPE V100
Vital signs monitor
The CARESCAPE* V100 monitor is designed for care areas where patients
require vital signs measurements. It can go with you from one patient
to the next, and because of its speed, accuracy and connectivity, the
CARESCAPE V100 monitor collects the right information at the point of
care to help you make fast, quality care decisions.
Features
• Can be used for spot-checking or for continuous monitoring,
providing you the flexibility of two devices in one
• Designed for adult and pediatric use, as well as neonatal patients
with very low perfusion rates
• Includes the same advanced parameters and algorithms as other
higher acuity GE monitors, helping ensure measurement consistency
across all care areas
• Non-invasive blood pressure measurement uses GE’s exceptional
DINAMAP* technology
• Three choices for pulse oximetry include GE Ohmeda TruSignal*;
Nellcor OxiMax** or Masimo SET**
• Three options for temperature include Exergen** TemporalScanner**,
Alaris** Turbo Temp** and Alaris Tri-Site
• Allows for inflation setpoints, so you can be sensitive to patients’
special circumstances and ensure their comfort
• Large display makes it easy to read even from a distance
• Stores up to 40 measurements for up to 24 hours with the capability
to print strips
• Designed for easy serviceability with a removable panel for easy
access and simple field-replacement kits
• Typical battery life of up to 11 hours before requiring recharge.
If the battery is discharged, it maintains the data.
• Connect up to three additional accessories simultaneously
with the DINAMAP Serial Hub, via the monitor’s HostComm
(sold separately)
Technical specifications
Portability Carried by recessed handle or on
a roll stand
Printer
Printer type Thermal dot array
Resolution 384 dots/inch horizontal
Paper type Must be compatible with
GE PN 770137
Languages printed English, German, French, Italian,
Spanish, Portuguese, Hungarian,
Polish, Czech, Finnish, Swedish,
Danish, Dutch, Norwegian, and
Slovak
Temperature options
Exergen TemporalScanner temporal artery thermometer
Alaris Turbo Temp** thermometer
Alaris Tri-site thermometer
Performance specifications
GE TruSignal SpO2 specifications
Measurement range
SpO2 1 to 100%
Pulse rate 30 to 250 bpm
Accuracy Saturation
Adult 70 to 100% ±2 digits
(without motion)
Neonate1 70 to 100% ±3 digits
(without motion)
Adult/Neonate2 70 to 100% ±3 digits
(during clinical motion)
Low perfusion 70 to 100% ±2 digits
(during clinical low perfusion)
Pulse rate
Adult/Neonate 30 to 250 bpm: ± 2 digits or ±
2%, whichever is greater, (without
motion)
30 to 250 bpm: ± 5 digits
(during motion)
Low perfusion 30 to 250 bpm ±3 digits
1 SpO2 measurement accuracy is based on deep hypoxia studies using TruSignal
sensors on healthy adult volunteer subjects. Arterial blood samples were analyzed
simultaneously on multiple CO-oximeters. This variation equals plus or minus one
standard deviation. Plus or minus one standard deviation encompasses 68% of the
population.
2 Applicability: TS-AF sensors.
NOTE: Accuracy may vary for some sensors; always check the instructions for the
sensor.