Note
- One vehicle’s software Lifetime Free Update, for More Vehicle you need to spend $21.99/year (iOS & Android Devices) for each Vehicle
- All OBDII functions are available and free.
https://www.autel.com/vehicle-coverage/coverage2
3. Not all models under the same brand are supported
4.AP200 supports most vehicles before 2018.
How to Use it?
1. Download and install the app-MaxiAP200 in Google Play or App Store to your device;
2. Register and log in to the MaxiAP200 APP;
3. Get one free car software through Mall after binding VCI for the first time;
4. Plug the MaxiAP200 tool into the vehicle’s Data Link Connector (DLC);
5. Turn on the vehicle ignition while turning the engine off;
6. Tap the Me/Setting button of your device to pair the MaxiAP AP200 with your device;
7. Start to diagnose your car.
How to change Language?
Language Support :
English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian
Autel AP200 language is synchronized with the phone language; Change your mobile phone language then the AP200 language will update
Autel AP200 Bluetooth OBD2 Scanner Code Reader with Full Systems Diagnoses, AutoVIN, Oil/EPB/BMS/SAS/TPMS/DPF Resets IMMO Service for Family DIY users
ONLY ONE SOFTWARE IS AVAILABLE FOR A LIFETIME!!!
Other software is charged in the APP.
All SYSTEMS DIAGNOSES
Read and erase codes for all available systems using the supported protocols. The tablet-type MaxiCOM diagnostic tool is the best way to display live data in text, graph & analog for easy data review
To diagnose the Brake system if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
To diagnose the Emission system the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
To diagnose the Fuel system if the vehicle won’t start or the “Check Engine” light is illuminated. Check the car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
To diagnose Transmission your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
To diagnose Wiper System if you observe a chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
To diagnoseLight the System if you see rapid signal blinking or dimming lights.
And many more ...
ADVANCED RESET SERVICES
This Bluetooth OBD2 scanner is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. There is some commonly-used special reset services are listed for your reference:
Oil Reset –Perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle's driving conditions and climate.
EPB Reset –Maintain the electronic braking system safely and effectively by deactivating and activating the brake control system, setting brakes after disc or pad replacement, etc.
BMS Reset –Evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
SAS Reset –perform calibration for the Steering Angle Sensor, which permanently stores the current steering wheel position as the straight-ahead position in the sensor EEPROM.
TPMS Reset –quickly look up the tire sensor IDs from the vehicle’s ECU, as well as perform TPMS replacement and sensor test.
IMMO Service - Disable the lost vehicle keys and program the replacement key fob.
DPF Regeneration –Manage DPF regeneration, DPF component replacement teach-in, and DPF teach-in after replacing the engine control unit.
THE OPERATING PROCEDURES
1. Download and install the app-MaxiAP200 in Google Play or App Store to your device;
2. Register and log in to the MaxiAP200 APP;
3. Get one free car software through Mall after binding VCI for the first time;
4. Plug the MaxiAP200 tool into the vehicle’s Data Link Connector (DLC);
5. Turn on the vehicle ignition while turning the engine off;
6. Tap the Me/Setting button of your device to pair the MaxiAP AP200 with your device;
7. Start to diagnose your car.
Specifications
Communications: BL 4.2 Dual-Mode
Wireless Frequency: 2.4 GHz
Input Voltage Range: 9 VDC to 26 VDC
Supply Current: 100 mA@12 V
Sleep Mode Current: 3 mA@12 V
Operating Temp.: 0°C to 50°C
Storage Temp.: -20°C to 70°C
LengthWidthHeight: 59.2 mm (2.33”) * 48.5 mm (1.91’’) * 24.6 mm (0.97’’)
Weight: 35g (0.07 lb.)