Eastwood's 2K Ceramic Chassis Black is a super-durable satin coating that's not only beautiful, but also tough as nails. Our proprietary formula ensures a high-quality 2K (2-component) 4:1 chemical base to create the ultimate, factory-correct finish. Must purchase 1 8-oz. Activator for each 1-quart satin Ceramic Chassis Black; you'll need 2 quarts of Chassis Black for a full-frame vehicle.
Now there's a catalyzed urethane form of our popular Chassis Black with a difference. This is our most durable, chemical resistant, and easiest to spray, chassis Black yet! And since it's formulated with ceramic, it offers even better abrasion resistance! Easy 4:1 mix with the 21854Z Activator 8 oz. & spray with a 1.3 or larger nozzle spray gun. Covers about 50 sq. ft. in 2 coats. Withstands peaks up to 300 degrees F. For greatest durability apply over our 50242ZP Epoxy Primer. For professional use only. Contains isocyanates. Proper respiratory protection Must Be Used.
Content:
One catalyzed quart of Eastwood Ceramic Chassis Black covers about 50 square feet in 2 coats.
APPLICATION
Eastwood Ceramic Chassis Black is easily applied with your HVLP gun with a 1.3mm or larger nozzle. Provides complete hiding in 2 coats. Allow 10 minutes between coats. Refer to the product label for more complete application directions and safety information. Can be applied directly over our 50242ZP Epoxy Primer after 60 minutes to 5 days without scuffing.
SAFETY
This product is designed for use by trained professionals. Read & understand all warnings and directions before use. Do Not Use Without Sufficient Ventilation. Users must wear an appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Do not use this product, or be exposed to spray mist/vapors if
Attention California Residents - Proposition 65