CYBER MONDAY DEALS
When an ECU/module is damaged, you have to replace a new one. After replacing the ECU/module, you have to follow the strict procedures of the manufacturer to match, learn, code, or even program it before it functions normally. Otherwise, the car cannot start or some parts cannot work normally.
Featuring ECU/Module replacement functions, Autel scanner Maxicom MK906BT can help you initialize, match, learn, or code the newly replaced ECU/module to get it back on track, except the programming, online coding, online matching, and online parameterization.
Autel OBD2 scanner MK906BT can help almost all vehicles replace ECUs/modules, such as Honda, Jeep, Chrysler, VAG, GM, Peugeot, Citroen, Mitsubishi, Suzuki, etc. However, it’s NOT available for modules on the vehicles that need to do programming, online coding, online parameterization, and online matching.
Same as Autel Maxisys MS906BT/MS908/MK908, Maxicom MK906BT has the capability of ECU coding to change preprogrammed options in the software, helping you customize your car faster as needed.
This Autel scan tool MK906BT comes with 36+ service functions and can be updated constantly for wider vehicle coverage, more functions, and functional optimization, to meets all your needs for various scheduled repairs or maintenance.
Oil Reset, EPB, TPMS, BMS, Brake Bleed, IMMO keys, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Lang change, Headlamp, CHG tire size, TEC learn, ABSSRS, Cylinder, VGT learn, Speed & PTO, Clutch, Trans adaptation, Airbag reset, and A/F Setting
For Ford: Power balance, Clear the transmission adaptive tables, etc.
For GM:Crankshaft position variation learn, Cylinder power balance, RPM control, etc.
For Honda: Torque sensor learn, TPMS sensor position check, Brake pressure sensor, etc.
For JEEP: Erase all ignition keys, PCM replaced, ECU initialization, Initialize ESP sensor, Cylinder balance test, Activate/Deactivate front seat video, etc.
Note: Autel Maxicom MK906BT is the same as Maxisys MS908 and Maxicom MK908 , and its 36+ special functions are updating to include more.
OE-Level All Systems Diagnoses: shorten the diagnostic time and reduce the diagnostic fee.
This Autel diagnostic tool can access all available systems, such as Engine, AT, ABS, SRS, IMMO, air conditioning system, steering angle system, air suspension system, etc. and perform OE-level diagnoses, which enable the mechanics/workshops to perform the same level of diagnosis, analysis, and maintenance as the OEM dealer.
This automotive scan tool features the latest VIN-based Auto VIN Scan function. It can identify CAN vehicles in just one touch, scan all the diagnosable ECUs on every vehicle quickly, and run diagnostics on the selected system easily.
The MaxiVCI V100 of MK906BT provides a wide working range (about 164 feet or 50 m) and stable BT communication for the vehicle and this diagnostic tool.
With wide vehicle coverage, this Autel diagnostic scanner can diagnose both the OBD2/EOBD and OBD1 vehicles through the VCI device and test adapters (for non-OBD II vehicles).
The test adapters for non-OBD II vehicles include:
Same as Maxisys MS908 &Maxicom MK908, Autel diagnostic tool MK906BT features Bi-directional Control, also known as Active Test or Actuator Test. It can output the commands to ECUs, read the ECU data to determine the integrity of system or parts, and monitor the operation of the actuators, letting you quickly know if a specific system, component, or a subsystem is functioning properly or not.
Here are some examples of Active test:
Designed with VAG Guided Functions, Autel maxicom MK906BT provides on-screen instructions for you to complete some complicated maintenance or functions (SAS calibration, ECU Coding, etc.) gradually on VW, Audi, Seat, Skoda, etc.
Autel MK906BT scan tool enables you to make full use of the hidden features of VW, BMW, Seat, Porsche, Renault, etc. e.g., Auto Park function, tilting rear-view mirrors, unfolding mirrors, etc. This function depends on the electronic features already built in.
With the new version V9.50 UPDATING on Autel scanner MK906BT, you will have access to the security gateway module on 2017 and newer Fiat Chrysler vehicles, so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.
With IMMO Keys function, automotive diagnostic scanner MK906BT can disable or clear info of the lost vehicle keys, add new keys, program the replacement key fob for most Asian and American vehicles. Note: Not available for BMW, Benz, Audi, etc.
The Autel MaxiVideo Inspection Endoscope MV105 can be perfectly matched with the Autel Maxicom MK906BT and turn MK906BT into a video inspection scope. It enables you to examine and clean difficult-to-reach car areas normally hidden from sight, such as spark plug holes, engine cylinders, and small parts. Thus, you can inspect, maintain, or clean cars in a faster, safer, and more reliable way.
As the workshops’ first choice, this cost-effective Autel diagnostic tool can access all vehicle systems of 80+ makes, 140+ brands, and 10000+ models to perform OE-level diagnostics. Although its default software language is English, you just need to send the serial No. to us to change English to Spanish, Portuguese, French, Japanese, Simplified Chinese, Traditional Chinese, German, Polish, Russian, Italian, Korean, Dutch, or Swedish.(No charge)
When it comes to maximum convenience, high quality, and swift diagnosis, Autel MK906BT is your perfect companion. As the 2024 new version, this Autel genuine product is built with the Android 4.4.2 operating system, Samsung Exynos 5260 6-core processor, a 64G SSD hard drive, an 8" capacitive HD touch screen, and long-distance wireless communication, efficiently offering comprehensive vehicle diagnostics and analysis.