LuxHeat Floor Heating Mat LuxHeat's Radiant Floor Heating Mat is one of the most robust, versatile, easy to install floor heating systems available on the market today. The resin coated fibreglass re-enforcing mesh is designed to protect the heating cable and add strength to the layer of thinset or mortar.
The re-enforcing mesh can be cut, turned, flipped, or in part removed, to accommodate any room size or shape . While the MESH can be cut, the heater wire MUST NOT be cut or shortened.
Elements are ETFE insulated and covered by a tough outer jacket, providing the ultimate dialectic and mechanical strength. Heater wire is less than 5/32" thick, ensuring minimal effect to finished floor height. Heater wires are pre-spaced at 3” intervals – providing optimal heat distribution. Mats are 20” wide, and available in various lengths. Watt density: 12w/sqft. Voltage: 120v.
UWG4-4999 WiFi Programmable Thermostat The UWG4 WiFi Thermostat can be configured for control of Floor Temperature , Room Temperature , or Room Temperature with Floor Temperature Limiting - providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures.
The UWG4 offers all the necessary functions to ensure easy installation and temperature control, for every floor type . Accurate and intelligent control reduces running costs and ensures personal comfort.
Ambient Temp Range +32 to +104°F (0 to +40°C). Floor limit range: +41 to +104°F (+5 to +40°C). Dimensions: H 4.8” x W 3” x D 1”. Load: 15Amps (1800w@120v). Built-in Class A GFCI. Voltage: 120v.
LuxHeat Monitor The LuxHeat Monitor is designed to measure the heating cable’s continuity during installation.
If the heating cable is cut or damaged during installation the Monitor will immediately alert the installer by means of a loud alarm and red flashing light. We still recommend an ohms test is carried out before, during and after installation.
If the alarm sounds we suggest contacting a professional to identify the damaged area and make the repair.
Early warning system, avoiding costly repairs in the future. Connects directly to the heater - Live, Neutral and Earth. Provides peace-of-mind during installation. Offers real-time continuity monitoring. Includes loud alarm and flashing light. Works with all floor heating systems. Includes 2xAAA batteries.
Floor Sensor The Floor Sensor is a reliable and accurate temperature sensing probe designed to measure floor temperatures when connected to a thermostat. OJ Thermostats’ default setting is Dual Sensing (Air/Floor) , meaning the floor sensor will need to be installed and connected .
The thermostat can be set to measure AIR only , but for optimal control and comfort we recommend installing the floor sensor and using the thermostats default ‘Dual Sensor’ setting.
Installs directly between heating wires for accurate temperature readings Used in conjunction with Thermostat to limit floor temperature Resistance: 8 to 12 K OHM measures 68˚F to 86˚F (20˚C to 30˚C) Neutral polarity making for simple connections 15ft length allows for optimal placement Connects directly to thermostat Sensor type: NTC 10 K OHM